IEI Launches the New NANO-ULT3 Embedded Board
Features |
|
|
|
|
 |
EPIC SBC with 6th generation Intel® ULT proccessor supports dual-channel DDR4 SODIMMs |
 |
Triple independent display support |
 |
Easy assembly heat spreader for thermal management |
 |
Full-size PCIe Mini slot with SIM sockets for 3G/LTE expansion |
 |
COM, USB 3.0, SATA 6Gb/s, mSATA, eMMC 5.0 and audio support |
 |
IEI One Key Recovery solution allows you to create rapid OS backup and recovery |
|
 |
Specifications |
|
|
Model |
NANO-ULT3 |
SoC |
6th generation Intel® mobile ULT on-board SoC
Intel® Core™ i7-6600U (up to 3.4GHz, dual-core, 4MB cache, TDP=15W)
Intel® Core™ i5-6300U (up to 3.0GHz, dual-core, 3MB cache, TDP=15W)
Intel® Core™ i3-6100U (up to 2.3GHz, dual-core, 3MB cache, TDP=15W)
Intel® Celeron® processor 3955U (up to 2.0GHz, dual-core, 2MB cache, TDP=15W) |
BIOS |
AMI UEFI BIOS |
Memory |
Two 260-pin 2133/1866 MHz dual-channel DDR4 non-ECC unbuffered SO-DIMMs (system max. 32 GB) |
Graphics Engine |
Intel® HD Graphics Gen 9 Engine with 16 low-power execution units, supporting DX11/12,
OpenGL 4.3/4.4 and OpenCL2.x, ES 2.0 |
Display Output |
Triple independent display
2 x HDMI (up to 4096x2160@24Hz)
1 x 18/24-bit dual-channel LVDS by CH7511B DP to LVDS converter (up to 1920x1200@60Hz)
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 4096 x 2304@60Hz) (colay with HDMI1) |
Ethernet |
LAN1: Intel® I219-LM PHY with Intel® AMT 11.0 supported
LAN2: Intel® I211-AT PCIe GbE controller |
External I/O Interface |
4 x USB 3.0 |
Internal I/O Interface |
1 x 8 GB eMMC (optional) |
1 x USB 2.0 (180° Type-A) |
1 x KB/MS (1x6 pin) |
2 x USB 2.0 (2x4 pin, P=2.0) |
1 x RS-232/422/485 (2x5 pin, P=2.0) |
2 x RS-232 (2x5 pin, P=2.0) |
2 x SATA 6G/s with 5V SATA power connector |
|
SMBus |
1 x SMBus (1x4 pin) |
Audio |
Realtek ALC662 HD codec
1 x Analog audio (2x5 pin) |
Front panel |
1 x Power LED & HDD LED (1x6 pin)
1 x Power button (1x2 pin)
1 x Reset button (1x2 pin) |
LAN LED |
2 x LAN LED (1x2 pin) |
Expansion |
1 x Full-size PCIe Mini card slot (with SIM holder & mSATA support)
1 x Half-size PCIe Mini card slot |
Digital I/O |
1 x 8-bit digital I/O (2x5 pin) |
Fan Connector |
1 x CPU fan connector (1x4 pin)
1 x System fan connector (1x4 pin) |
Power Supply |
12V only DC input
1 x Internal power connector (2x2 pin)
Support AT/ATX mode |
Watchdog Timer |
Software programmable supports 1~255 sec. system reset |
Power Consumption |
12V@2.48A (Intel® Core™ i3-6100U CPU with two 8 GB memory) |
Operating Temperature |
-20°C ~ 60°C |
Storage Temperature |
-30°C ~ 70°C |
Operating Humidity |
5% ~ 95%, non-condensing |
Dimensions |
115mm x 165mm |
Weight |
GW:850g / NW:350g |
|
 |
Ordering Information |
|
|
Part No. |
Description |
NANO-ULT3-i7-R10 |
EPIC SBC supports Intel® 14nm 6th Generation Mobile Core™ i7-6600U (15W) on-board Processor (ULT) with HDMI/LVDS/iDP, Dual PCIe GbE, USB 3.0, SATA 6Gb/s, mSATA, Dual PCIe Mini, COM, Audio and RoHS |
NANO-ULT3-i5-R10 |
EPIC SBC supports Intel® 14nm 6th Generation Mobile Core™ i5-6300U (15W) on-board Processor (ULT) with HDMI/LVDS/iDP, Dual PCIe GbE, USB 3.0, SATA 6Gb/s, mSATA, Dual PCIe Mini, COM, Audio and RoHS |
NANO-ULT3-i3-R10 |
EPIC SBC supports Intel® 14nm 6th Generation Mobile Core™ i3-6100U (15W) on-board Processor (ULT) with HDMI/LVDS/iDP, Dual PCIe GbE, USB 3.0, SATA 6Gb/s, mSATA, Dual PCIe Mini, COM, Audio and RoHS |
NANO-ULT3-C-R10 |
EPIC SBC supports Intel® 14nm 6th Generation Mobile Celeron® 3955U (15W) on-board Processor (ULT) with HDMI/LVDS/iDP, Dual PCIe GbE, USB 3.0, SATA 6Gb/s, mSATA, Dual PCIe Mini, COM, Audio and RoHS |
32000-023800-RS |
PS/2 KB/MS cable, 135mm, P=2.0 |
32001-008600-200-RS |
Dual-port USB cable, 210mm, P=2.0 |
|
 |
Packing List |
|
|
1 x NANO-ULT3 single board computer with heatspreader |
1 x SATA with power cable kit |
1 x Audio cable |
1 x One Key Recovery CD |
1 x Power cable |
1 x QIG (Quick Installation Guide) |
1 x RS-232 cable |
1 x Utility CD |
|
 |
|