Choose your language
FAQ > Embedded Board
WAFER-945GSELVDS2-N270-R10
WAFER-945GSELVDS2-N270-R10
KBA-01041-B6Y7XL
Brief Description
Why there is no VGA output after installing WIN7?
Solution

The Win 7 issue is due to the inherent WIN 7 driver will auto switch the first output to LVDS1 (that why it switch off the VGA output even setup the CRT in 1st priority in BIOS) and this phenomenon still an application limitation now. If you want the VGA output as the only output then you should use a panel attached to LVDS1 then go to screen resolution setting of WIN 7 to choose the VGA port as the output device in Intel graphic utility. This setting can be saved and next time the system can boot up with VGA output properly.

Remark

2016/02/24
Back