FAQ > Embedded Board
WAFER-PV-D5252-R11 - Why boot-fail (or) POST code stops at 98 when some USB-devices are plugged?
|WAFER-PV-D5252-R11 - Why boot-fail (or) POST code stops at 98 when some USB-devices are plugged?|
|There should be a compatibility issue due to Intel Pine-View CPU with UEFI BIOS which has old USB-drivers in kernel.|
|We have been released latest std BIOS ver-26(E338AR26.ROM) with updated kernel driver for USB to support maximum USB devices without problems.|
There won't be any issues for hot-plug or plug&play USB-devices after system boot-up in old BIOS itself.
This latest BIOS flash is needed when using special USB devices, otherwise no needed to flash BIOS!