Choose your language
FAQ > Industrial Motherboard
IMBA-Q870-i2-R10 - How to make possible HOT SWAP support for HDD without difficulties?
IMBA-Q870-i2-R10 - How to make possible HOT SWAP support for HDD without difficulties?
KBA-01197-46RPRW
Brief Description
The 'Hot swappable for HDD can possible by following instructions'
Solution

1.Setup above motherboards with HDD drive-bay which can support hot-swap like some models from IEI 'RHD-302SATA-R11/RHD-102SATA-RS-R10/etc.'.

2.Change BIOS settings from IDE to AHCI or RAID(also configure) as per application requirements.

3.Install OS and then drivers for all mainly for additionally latest 'Intel_RST driver(Rapid storage technology)' from Intel's download center!

Remark
Cross check with IEI about latest BIOS update or further installation guide.

2016/09/09
Back