FAQ >
IBX Series
uIBX-200-R10/Z510P works for AT mode
| uIBX-200-R10/Z510P works for AT mode |
| KBA-01090-NHWFCP |
| Brief Description |
| How to make uIBX-200-R10/Z510P box supporting auto-power-on after power loss? (Because there is no CMOS option of [power mode after power fail].) |
| Solution |
| Switch SW1 switch to left for AT mode. (See the attached picture to to know SW1 location.) |
| Remark |
| *** Attachments *** |
2016/02/24
