FAQ >
Embedded Board
How to use audio function on HYPER-BW
| How to use audio function on HYPER-BW |
| KBA-01238-9B976K |
| Brief Description |
| There is no any audio codec IC on the HYPER-BW motherboard, it must to connect with a HDA audio peripheral board AC-KIT-892HD-R10 to provide the audio function. |
| Solution |
HYPER-BW motherboard already supported HDA audio function, and there is a 'J_AUDIO1' connector design for connect to audio peripheral board AC-KIT-892HD-R10. ***Important Remind: *** Please set the 'jumper J2' as '1-2 short' on AC-KIT-892HD-R10 audio peripheral board, it will set DDVD power as +1.5V to suit with HYPER-BW motherboard's circuit design. |
| Remark |
It tested audio function was working on Windows 7 and Ubuntu 14.04.5 LTS with OS built-in drivers. |
2017/11/10
