HYPER-EHL

Pico-ITX SBC 支持 Intel® Celeron J6412/N6210 板载 SoC,板载 4GB LPDDR4x 显存,带 HDMI™, iDPM, M.2 M key, USB 3.2, iSATA 6GB/s, COM, PCIe x4 for riser card, 符合RoHS

HYPER-EHL IO
HYPER-EHL IO
HYPER-EHL BACK
HYPER-EHL Side
HYPER-EHL Side
NANO-EHL Back with case
  • HYPER-EHL IO
  • HYPER-EHL IO
  • HYPER-EHL BACK
  • HYPER-EHL Side
  • HYPER-EHL Side
  • NANO-EHL Back with case
» 支持 Intel® Atom™ x6000 series / Pentium® / Celeron® 处理器 (Elkhart Lake平台)
» 支持 Intel® I225V 2.5GbE 以太网控制器
» 通过 HDMI™ 和 iDPM 支持独立双显
» 支持 1 个 PCIe x4 和 1 个 M.2 M Key 扩展
» 支持两个 USB 3.2 Gen 2、两个 USB 2.0,传输速度高达 10Gb/s
HYPER-EHL 2.5' Pico-ITX fanless single board computer
  • PCIe Gen3 x4

    PCIe Gen3 x4

  • slash
  • LPDDR4x-3200

    LPDDR4x-3200

  • slash
  • Dual Display

    Dual Display

  • slash
  • M.2 M Key

    M.2 M Key

  • slash
  • 2.5GbE

    2.5GbE

  • slash
  • iSATA 6Gb/s

    iSATA 6Gb/s

  • slash

HYPER-EHL 是⼀款 2.5 英⼨ Pico-ITX ⽆⻛扇单板计算机,采⽤板载Intel® Celeron® J6412/N6210 处理器和 Intel® UHD 集显。它⽀持双重独立显⽰,并提供多个⾼速 I/O,主板尺⼨仅为 100 x 72 mm,包括 2.5GbE、USB 10Gb/s 和 RS-232/422/485。可通过PCIe Gen3 x4 插槽添加额外功能,增强空间系统集成的灵活性。可适用于AMR/AGV、送货机器⼈、电动汽⻋充电站和医疗保健系统等关键应⽤。

Front view of HYPER-EHL Pico-ITX motherboard
Rear view of HYPER-EHL 2.5' single board computer
I/O panel of HYPER-EHL 2.5' motherboard

高性能、低功耗
Intel® Celeron® J6412/N6210 板载 SoC

HYPER-EHL配备Intel@Celeron@J6412/N6210处理器和4GB板载LPDDR4X,能够以低功耗提供高水平的CPU和图形性能。与上一代产品相比,它的CPU性能提升了1.7倍,显卡性能提升了2倍,基准得分提高了74%。HYPER-EHL具有低功耗和高吞吐量的特点,在保持高计算量的同时节省了大量的能量,有利于大量边缘计算。

Comparison bar chart of Intel Celeron N6210 & J6412 vs. Celeron N3350 & J3455
Long-term Support

长期供货

英特尔® 赛扬® J6412/N6210 处理器已上市并⻓期供货(基于英特尔 IOTG 路线图)。这种⻓期供货可以让寻求最⼤化投资回报的集成商受益。

可靠的 4GB LPDDR4x 内存

HYPER-EHL 配备 4GB 双通道 LPDDR4x 焊接内存, 提供高达 3200MT/s 的快速内存速度和低电压 (VDDQ 电压 0.6V)。与插槽式存储器相比,焊在板上的类型使HYPER-EHL能够提供更加稳定、可靠的操作,适用于运输、AMR和其他移动应用等关键用途。

Solder side of the HYPER-EHL Pico-ITX motherboard with the onboard LPDDR4x memory highlighted

LPDDR4x Memory

PCI Express Gen3 插槽支持
广泛的 I/O 和功能扩展

HYPER-EHL 具有 PCIe Gen3 x4(x4 信号)插槽,这是 IEI 2.5" 单板计算机的全新设计,可轻松集成 PoE 卡、视频采集卡、I/O 卡或兼容的 IEI 转接卡更多功能扩展。威强电转接卡有不同的方向和配置,提供了极大的灵活性和可扩展性。每个转接卡都配有金属支架,以增强稳定性,不仅是转接卡本身,还有安装在其上的扩展卡。

HYPER-EHL 2.5' SBC with an outwards-facing riser card for two PCIe 3.0 x2 expansions
HYPER-EHL 2.5' SBC with an outwards-facing riser card for four PCIe 3.0 x1 expansions

向外扩展:两个 PCIe x2 / 四个 PCIe x1

外向转接卡可通过一个 PCI Express 接口连接最多 4 个外向 PCIe x1 插槽。虽然可能会占用更多空间,但它有助于增强系统内的气流和热传递。非常适合足够宽的机箱来放置扩展卡。

HYPER-EHL 2.5' SBC with an inwards-facing riser card for two PCIe 3.0 x2 expansions
HYPER-EHL 2.5' SBC with an inwards-facing riser card for two PCIe 3.0 x2 expansions

向内扩展:两个 PCIe x2 / 四个 PCIe x1

向内转接卡可通过一个 PCI Express 接口连接最多 4 个向内 PCIe x1 插槽。适合安装在空间有限的地方。通过更高的高度来增加板之间的间距,可以确保空间受限应用的高效散热。

HYPER-EHL 2.5' SBC installed with a PCIe 3.0 x4 expansion card

PCIe x4 接口卡扩展

The PCIe Gen3 x4 (x4 信号) 插槽提供 高达 4GB/s 的高速数据传输速率 , 允许额外的定制和扩展。直接安装 PCIe 卡使主板能够在边缘运行更复杂、更具挑战性的任务。

HYPER-EHL 2.5' SBC with an outwards-facing riser card for two PCIe 3.0 x2 expansions
HYPER-EHL 2.5' SBC with an outwards-facing riser card for four PCIe 3.0 x1 expansions

Outwards-facing Expansions: Two PCIe x2 / Four PCIe x1

The outwards-facing riser cards enable the connection of up to four outwards-facing PCIe x1 slots via one PCI Express interface. Although may take up more space, it can help enhance the airflow and heat transfer within the system. It is ideal for the chassis that is wide enough for the expansion card to be placed.

HYPER-EHL 2.5' SBC with an inwards-facing riser card for two PCIe 3.0 x2 expansions
HYPER-EHL 2.5' SBC with an inwards-facing riser card for four PCIe 3.0 x1 expansions

Inwards-facing Expansions: Two PCIe x2 / Four PCIe x1

The inwards-facing riser cards enable the connection of up to four inwards-facing PCIe x1 slots via one PCI Express interface. It is suitable for installation where space is limited. With higher height to increase spacing between boards, it can ensure efficient heat dissipation for space-constrained applications.

HYPER-EHL 2.5' SBC installed with a PCIe 3.0 x4 expansion card

PCIe x4 Interface Card Expansion

The PCIe Gen3 x4 (x4 signal) slot, providing high-speed data transfer rate of up to 4GB/s, allows for additional customization and expansion. Directly installing a PCIe card enables the motherboard to run more complex and challenging tasks at the edge.

双显示输出支持4K图形

集成的 Intel® UHD 显卡具有多达.16个 EUs、 高达 2倍的性能提升和 4K 支持, 使 HYPER-EHL 能够通过 HDMI™ 1.4 端口和 IEI 专用 iDPM 插槽在两个同步显示器上驱动 4kp30 的最大分辨率。

Dual Display Outputs Support Graphics in 4K
HYPER-EHL 2.5' motherboard with its two display interfaces highlighted - iDPM slot and HDMI™ 1.4
HYPER-EHL 2.5' motherboard with its two display interfaces highlighted - iDPM slot and HDMI™ 1.4
arrow left

2.5GbE 网络实现高效数据传输

RJ45 LAN 端口通过集成 Intel® I225V 控制器提供 2.5GbE 连接。它可以提高整体网络性能,提供闪电般的速度,并提高大规模工作负载所需的带宽。通过与2.5G网络交换机连接,可以为边缘物联网的部署形成坚实、优化的基础设施,以实现设备之间的高效通信。

确保快速稳定的数据传输

SSD因其抗冲击、耐高温、寿命长、稳定性高等特点,广泛应用于工业应用中,提供可靠的数据存储。配备的 M.2 2242 M-key 插槽配备 PCI Express Gen3 x2 带宽,支持高达 16Gbps 的数据传输速度,使其成为安装NVMeSSD以在恶劣环境中提供快速数据访问的完美选择。

 

HYPER-EHL 2.5' motherboard with its M.2 PCIe 3.0 x2 M key 2242 slot highlighted
M.2 2242 M-key socket comes with PCI Express® Gen3 x2 arrow left

集成数据和电源的薄型 SATA 6Gb/s 端口

通过 iSATA 连接器支持 SATA 6Gb/s SSD 或 HDD,该连接器在较小 的占地面积内提供 SATA 和 SATA 电源 (+5V) 信号。这种薄型连接器 可以节省系统集成空间,同时实现边缘设备之间的高速数据传输。

SATA 6Gb/s cable providing both data and 5V power signals for HYPER-EHL Pico-ITX SBC

应用领域

AMR (Autonomous Mobile Robots) and AGV (Automated Guided Vehicle) in a warehouse
robot arms doing assembly in a manufacturing production line
a drone delivering package indoors
an electric car parking beside a EV charging station for vehicle charging
an physician taking care a patient on the bed, with a vital sign monitor placed on bed head
a person pressing buttons on the control panel of a smart parcel locker

方面

HYPER-EHL
带有朝外转接卡的 SBC (R2S)
带有朝外转接卡的 SBC(R4S)
带有向内转接卡 (L2S)的 SBC
带向内转接卡的 SBC (L4S)
HYPER-EHL
SBC with Outwards-facing Riser Card (R2S)
SBC with Outwards-facing Riser Card (R4S)
SBC with Inwards-facing Riser Card (L2S)
SBC with Inwards-facing Riser Card (L4S)

Hardware Spec.

尺寸类型
尺寸类型 微型 ITX
系统
中央处理器
  • 板载 Intel® Atom™ x6000 系列 Celeron® 处理器 (Elkhart Lake 平台)
  • Intel® Celeron® J6412 板载 SoC (支持高达 2.6GH,四核,1.5M 缓存,TDP=10W)
  • Intel® Celeron® N6210 板载 SoC (支持高达 2.6GHz,双核,1.5M Cache,TDP=6.5W)
内存 LPDDR4x-3200Gbps 4GB,内存上限 8GB
内存上限 8GB
物理特性
尺寸 (长x宽x高) (mm) 100毫米 x 72毫米
净重 600g
存储
存储 1 x SATA : iSATA 6Gb/s
1 x M.2(NGFF) : M.2 M key (2242,PCIe Gen3 X 2)
I/O 接口
显示输出 1 x HDMI™ : 高达 4096x2160 @ 30Hz
1 x iDPM : 支持iEi eDP/ LVDS/ VGA 模块
网络 1 x LAN -
LAN1: Intel® I225V 2.5GbE 控制器
I/O接口 1 x 内部RS-232/422/485 : 1x9 pin, P=1.25
2 x 内部 USB 2.0 : 2x4 pin, P=2.0
2 x 外部 USB 3.2 Gen2x1 : 10Gb/s (Type A)
扩展 1 x PCIe x4 (PCIe Gen3 x4)
1 x M.2(NGFF) : M key (2242,PCIe Gen3 X 2)
电源
电源功耗 12V@2.07A
(Intel® Celeron® J6412 CPU 带 4 GB 3200 MHz LPDDR4x 内存,最大值加载,启用 EuP 模式)
电源供电 ATX/AT电源
支持AT/ATX模式
符合 ErP/EuP
环境
操作温度 0°C~60°C
存储温度 -30°C~70°C
湿度 5% ~95%, 无冷凝

Ordering Information

HYPER-EHL-N6210B-R10 PICO-ITX单板机支持Intel®双核 Celeron® N621012GH板载SoC,板载默认配置为4GBLPDDR4x内存,支持HDMIMDPM,M2M key,USB3.2SATA6GB/s,COM,用于立管卡和 RoHS 的PClex4
HYPER-EHL-J6412B-R10 PICO-ITX单板机支持Intel@四核Celeron®J64122.0GHz板载SoC,板载默认4GBLPDDR4x内存,支持HDMI™,iDPM,M2M key,USB3.2,iSATA6GB/s,COM,用于立管卡和ROHS的 PClex4

Package Contents

Package Content
  • 1 x HYPER-EHL 单板电脑

  • 1 x SATA 线材

  • 1 x QIG